Sanzo Power 112.5 kVA 3-Phase Dry-Type Transformer | 480V delta to 456Y/263 | NEMA 3R | Aluminum
$10,249.00
112.5 kVA three-phase step-down isolation transformer for 480V delta to 456Y/263 distribution. Aluminum windings, electrostatic shielding and a ventilated NEMA 3R enclosure with individually replaceable bolt-on panels.
Quotes include a link to approve and pay online — no phone call needed.
Specifications
| Brand | Sanzo Power |
| Capacity | 112.5 kVA |
| Primary Voltage | 480V delta |
| Secondary Voltage | 456Y/263 |
| Phase | Three Phase |
| Primary Amperage | 135.3 A |
| Secondary Amperage | 142.4 A |
| Direction | Step-Down |
| Frequency | 60 Hz |
| Winding Material | Aluminum |
| Weatherproof Rating | NEMA 3R |
| Insulation System | 220°C |
| Temperature Rise | 150°C |
| Electrostatic Shield | Included |
| Primary Taps | (2) 2.5% Above, (4) 2.5% Below |
| Connection | Delta - Wye |
| Transformer Type | Isolation / Distribution |
| Configuration | Dry Type, Ventilated |
| Part # | TX-DV-112M-3-325312-AL |
| Cooling | AA / Natural Convection |
| Enclosure Construction | Bolt-Together; Replaceable Panels |
| Efficiency at 35% Load | 98.74% |
| Dimensions (L x W x H) | 32.60" L x 31.89" W x 35.39" H |
| Length (L) | 32.60" |
| Width (W) | 31.89" |
| Height (H) | 35.39" |
| Unit Weight | |
| Duty | Continuous, General Purpose |
| Impregnation | Vacuum Pressure Impregnated |
| Primary Termination | Terminal Lugs |
| Secondary Termination | Terminal Lugs |
| Termination Access | Front Access Cover |
| Finish | ANSI 61 Grey Powder Coat |
| Tap Rating | Full Capacity; De-energized |
| Certification | cETLus |
| Standards | UL 1561 / CSA C22.2 No. 47 |
Product Description
The Sanzo Power TX-DV-112M-3-325312-AL is a 112.5 kVA three-phase dry-type isolation transformer that converts 480V delta power to 456Y/263 for commercial and industrial distribution. The grounded-wye secondary supplies 456V three-phase power for equipment loads and 263V line-to-neutral power through an accessible X0 neutral. The separate primary and secondary windings provide electrical isolation.
Construction and enclosure
Aluminum windings, a 220°C insulation system and a 150°C temperature rise support general-purpose distribution duty. An electrostatic shield separates the primary and secondary windings, and natural-air ventilation cools the assembly.
The NEMA 3R steel enclosure supports indoor or outdoor floor mounting. Its bolt-together construction uses individually replaceable panels, allowing a damaged panel or an unwanted conduit opening to be repaired without replacing the complete housing. Upper hooded vents and continuous mounting runners complete the enclosure.
Voltage adjustment and installation
Primary adjustment taps — (2) 2.5% above, (4) 2.5% below nominal — allow the installer to match the winding connection to the incoming supply. This is a purpose-built step-down transformer with H primary terminals and X secondary terminals.
Designed for building distribution, industrial machinery, HVAC systems, pumps and process equipment. Select capacity for the connected load and its starting requirements. Follow the unit wiring diagram for tap selection, grounding and field connections.